INFCR
TABLE OF CONTENTS

Part 1: Introduction
1.1	Description
1.2	Standard Features
1.3	Optional Features

Part: 2, 3, 4
2	Available Accessories
3	Unpacking
4	Safety Considerations

Part 5: Parts if the Meter
5.1	Front of the Meter
5.2	Rear of the Meter

Part 6: Setup
6.1	Conditions Requiring Disassembly
6.2	Disassembly
6.3	Rating/Product Label
6.4	Main Board Power Jumpers
6.5	Panel Mounting

Part 7: Sensor Input and Main Power Connections
7.1	Sensor and Input Connections
7.2	Main Power Connections
7.3	Analog and Relay Output Communications

Part: 8, 9, 10, 11, 12, 13, 14
8	Input Type (INPT)
9	Decimal Point Position (DEC.P)
10	Reading Configuration ("RD.CF")
11	Setpoint 1 Configuration (S1.CF)
12	Setpoint 2 Configuration (S2.CF)
13	Setpoint 1 Deadband (S1.DB)
14	Setpoint 2 Deadband (S2.DB)

Part 15: Output Configuration (OT.CF)
15.1	To Enable/Disable the Analog Ouput
15.2	To Select Analog Output as Current or Voltage
15.3	To Select Analog Output or Proportional Control

Part: 16, 17, 18
16	Proportional Band (P.BND)
17	Manual Reset (M.RST)
18	Ouput Scale and Offset (OT.S.O)

Part 19: Lock Out Configuration (LK.CF)
19.1	Enable or Disable Setpoint Changes
19.2	Enable or Disable the RESET button in the Run Mode
19.3	Enable Displays Program Version

Part: 20, 21, 22, 23, 24, 25, 26
20	Tuning Proportional Controller
21	Display Messages
22	Menu Configuration
23	Front Panel Displays
24	Setpoint Configuration Displays
25	Specifications
26	Factory Preset Values
WARRANTY / DISCLAIMER
NOTES, WARNINGS AND CAUTIONS Information that is especially important to note is identified by three labels: NOTE WARNING CAUTION IMPORTANT Note: provides you with information that is important to successfully setup and use the Programmable Digital Meter. CAUTION or WARNING: tells you about the risk of electric shock. CAUTION, WARNING or IMPORTANT: tells you of circumstances or practices that can effect the meter's functionality and must refer to accompanying documents.